2328 Roosevelt Ave | Enumclaw, WA 98022

Toll Free: (866) 638-1793 | Local: (360) 825-4610

Motorcycle Sidecars

Cycling Accessories

Other Mounts & Parts

Part NumberDescriptionPrice
DMC-MS-Basic BASIC UNIVERSAL MOUNT KIT
This set will get you started on a budget. Quantity of (2) SCE-99E and quantity of (2) SCB-99B. Note: Limited range of movement for lower mounts.
$360.00
DMC-MS-DLX DELUXE UNIVERSAL MOUNT SET
This set will give you the most range of movement. Quantity of (2) SCE-99E Clamps, (2) SCC-99C Clamps, (1) DMC-45C Clamp, (1) DMC-70C Clamp, (1) DMC- 45BL Boss, (1) DMC-70BL Boss.
$700.00
DMC-45*B BOSS
45 degree Boss (14" Long). Used with Clamp front & rear for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-45*BCRS BOSS
45 degree Boss Curved Rear (Short). Used to slip into rear of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-45*BCRL BOSS
45 degree Boss Curved Rear (Long). Used to slip into rear of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$75.00
DMC-70*B BOSS
70 degree Boss (14" Long). Used with Clamp front & rear for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-70*BCRS BOSS
70 degree Boss Curved Rear (Short). Used to slip into rear of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-70B*CRL BOSS
70 degree Boss Curved Rear (Long). Used to slip into rear of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$75.00
DMC-90*BB BOSS
90 degree Boss with Bell (12" Long) (Ural application). Used with Clamp front & rear for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-3C-OFFSET CLAMP
3" Offset Clamp. Used to slip into front & rear portions of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-45*C CLAMP
45 degree Clamp, grade 8 nuts & bolts. Used to slip into front & rear portions of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-70*C CLAMP
70 degree Clamp, grade 8 nuts & bolts. Used to slip into front & rear portions of sidecar frame for ease of installation of sidecars on various motorcycles with our mounting systems.
$65.00
DMC-SCE-99E CLAMP
1 1/4" Strap Clamp with Eye, zinc plated. SCE / SCC / SCB
$90.00
DMC-SCC-99C CLAMP
1 1/4" Strap Clamp with Clevis, zinc plated.
$90.00
DMC-SCC-1.5 CLAMP
1 1/2" Strap Clamp with Clevis, zinc plated.
$110.00
DMC-SCE-1.5 CLAMP
1 1/2" Strap Clamp with Eye, zinc plated.
$110.00
DMC-C-WO CLEVIS
Clevis Weld on U-Shaped, 1/2" DIA. Through holes, not plated.(for use with 5/8" male Hiem Joint)
$25.00
DMC-CPT CLEVIS
Clevis with 3/4" all thread shank X 1-1/4" L X 16 T.P.I. (threads per inch), zinc plated.
$35.00
10C-001 ROD EYE
Rod Eye 12mm diameter female hole, Shaft 3/4" diameter X 3/4" deep X 16 T.P.I. (threads per inch), zinc plated. MADE IN AMERICA!
$48.00
10M-001 ROD EYE
Rod Eye 12mm diameter female hole, 12mm shank X 2 1/2" L with 2" threaded X 1.5 T.P.I. (threads per inch), zinc plated (BMW/2 upper mount replacement) MADE IN AMERICA!
$48.00
10M-002 ROD EYE
Rod Eye 12mm diameter female hole, 12mm shaft diameter X 35mm deep X 1.5 T.P.I. (threads per inch), zinc plated. MADE IN AMERICA!
$48.00
10T-001 ROD EYE
Rod Eye 12mm diameter female hole, shank 3/4" diameter X 1-3/4" L X 16 T.P.I. (threads per inch), zinc plated. MADE IN NORTH AMERICA!
$48.00
HJ-F3/8 ROD END BEARING
3/8" Rod End Bearing female (Hiem Joint) for use with sidecar mounting hardware.
$35.00
HJ-M3/8 ROD END BEARING
3/8" Rod End Bearing male (Hiem Joint) for use with steering damper.
$35.00
HJ-M5/8 ROD END BEARING
5/8" Rod End Bearing male (Hiem Joint) for use with steering damper.
$40.00
DMC-STRUT STRUT
Custom Strut Fabrication Specific Lengths Available Please Contact Us For Pricing
$145.00
DMC-CSC Bushing California Friendship Sidecar (Early Models), Replacement Axle Brass Bushing $25.00
DMC-BSD STEERING DAMPER
BMW Steering Damper & Brackets (model specific) MADE IN AMERICA!
$200.00
DMC-SD-G STEERING DAMPER
Generic Steering Dampener
$200.00
DMC-SD-HD81 STEERING DAMPER
Harley Davidson 883 Sportster & Brackets (1986 & newer). MADE IN AMERICA!
$200.00
DMC-SD-HN STEERING DAMPER
Honda Night Hawk 250 Steering Damper & Brackets. MADE IN AMERICA!
$200.00
DMC-SD-MG STEERING DAMPER
Moto Guzzi Steering Damper & Brackets (model specific). MADE IN AMERICA!
$200.00
DMC-SD-V VOLKSWAGEN Steering Damper $95.00
DMC-MS-MISC DMC Sidecars has hundreds of mounting options available. Please call our sidecar experts, toll free in N. America, 1-866-638-1793 or 1-360-825-4610 for local or international callers. Please Call!

Inquire about these mounts